C
B
A
1
STEP 4 Roller Hinge Assembly
13
• Familiarize yourself with the Roller Hinge and Cam Lock terms detailed above in Figure 9.
• For ease of assembly, rest the Table Bed against the Crossbar (Figure 10) at the front of the
A-Frame.
• On one side of the Table Bed, lift the Cam Lock up all the way to unlock (Figure 11).
• In your other hand, hold one 3-Hole Roller Hinge at the Pivot Pin. With the Pivot Pin facing out
(away from the Table Bed), slide the bottom of the Roller Hinge between the Cam Lock and th
e
Bracket.
TIP:
Make sure that the Cam Lock is completely open when inserting the Roller Hinge, otherwise
assembly will be more difficult.
• Engage one of the holes in the Roller Hinge over the Bracket Pin. Figure 12 shows the Roller
Hinge installed correctly, with the Bracket Pin engaged in Setting C.
NOTE:
Refer to the Owner’s Manual for an explanation of the hole settings. If you are unsure, use
Setting C to start.
• Push down on the Cam Lock to lock it and secure the Roller Hinge.
• Repeat on other side. Make sure the Roller Hinges are in the same hole setting on both sides.
FIGURE 10
FIGURE 12
Unlocked
Locked
Bracket Pin
Cam Lock
Pivot Pin
Bracket
FIGURE 9
Bracket Pin
1
NEVER disassemble the
Roller Hinge Pivot Pin.
WARNING
!
FIGURE 11