H&S 2958, Руководство оператора

Страница: 18 / 54

- 4.1 -
4 Operation
4.1 To The New Owner or Operator
The H&S Bale Processor is designed to process round or square bales and place the
material in a row or spread it over the ground. Be familiar with all operating and safety
procedures before starting.
It is the responsibility of the owner and operator to read this manual and to train
all other operators before they start working with the machine. Follow all safety
instructions exactly. Safety is everyone's business. By following recommended
procedures, a safe working environment is provided for the operator, bystanders
and the area around the worksite. Untrained operators are not qualified to operate
the machine.
Many features incorporated into this machine are the result of suggestions made by
customers like yourself. Read this manual carefully to learn how to operate the machine
safely and how to set it to provide maximum efficiency. By following the operating
instructions, in conjunction with a good maintenance program, your Bale Processor will
provide you with many years of trouble-free service.
The machine is designed with a PTO powered swinging-flail rotor that processes large
or small round or square bales for feeding or bedding as appropriate. The hydraulically
activated tines on the rear of the frame are used to lift bales and load them into the bale
cradle of the processor.
A hydraulically powered cradle in the frame moves the bales over the rotor that extends
along the bottom of the machine. The rotor is equipped with swinging flails that process
the bale and expel it out the right side discharge opening.
The discharge deflector can be set in several different positions to allow for placing the
material in a row for feeding or for the spreading out of bedding. An optional electric
actuator or hydraulic cylinder kit can be used to position the discharge deflector.
A side access door, on the opposite side of the body to the discharge, enables the
operator to access the rotor for cleanout and maintenance.