36 |
www.HandiQuilter.com
Language
Set Language
1. Touch the Tools icon in the toolbar. The Tools screen
appears.
2. Press the flag icon to rotate through the language
options: English, French (Français), German (Deutsch),
and Spanish (Español).
3. When the flag representing the language you want to
use appears, press the
Home button to return to the
Main screen.
Update
1
. Place the USB stitck into the port on the right side of
the display as shown.
2. Wait for the color of the selection buttons to change
from gray to blue/green.
3. Select the machine, display, or sensor icon for
updateas needed.
4. When the display update button is selected the screen
will go blank and you will hear three beeps until the
update has completed and the screen comes back on.
5. Power down the machine between doing the display
and the machine updates.
6. When the machine update button is selected,the
display screen stays on and a count downnumber
appears above the machine update button icon. A four
tone signal sounds when the update on the machine is
done.
