HQ Capri User Manual
| 33
Diagnostics Tests
Motor Sensor Test
The Motor Sensor Test helps you determine if there may
be a problem with the HQ Capri motor. Slowly rotating
the hand wheel should result in an audible beep. If you
get a constant solid beep or no beep at all, this indicates
a failed test and the machine should be inspected by a
quali fied Handi Quilter repair technician.
Press the
HOME button to return to the Main menu
screen or the
Tools button to return to the Diagnostics
menu screen.
Speed Sensor Test
The Speed Sensor test can helps determine if there
is a problem with the HQ Capri speed sensor. Before
performing this test, remove the bobbin case and the
top thread. Press the foot pedal so that the machine will
begin slowly running. The white box will show a number
that should stabilize at 100 if the sensor is functioning
properly. Release the foot pedal to stop the ma chine.
Press the
Home button to return to the Main menu
screen or the
Tools button to return to the Diagnostics
menu screen.
Lighting
The brightness portion of this screen has two buttons and
a sliding control. The LED Light Ring and light bar can be
turned on or off with the switch button associated with the
LED location. Use the slide bar to adjust the brightness of
each light.
Calculator Screen
A basic six-function calculator is provided. The functions
provided are addition, subtraction, multiplication, division,
square root, and percentage. Use the back space on the top
right to delete a digit mistakenly entered.
Diagnostics Screen
Six different diagnostics tests can be performed on the
machine. These functions test the motor control operation,
the foot pedal, and the internal position sensors.
• Motor Sensor Test
• Speed Sensor Test
• Motion Sensor Test (Stitch Regulation)
• Needle Sensor Test
• Tension Calibration
• Foot Pedal Test
Press the
Home button to return to the Main menu
screen or the
Tools button to return to the Diagnostics
screen option.
