background image

      

HQ Capri User Manual 

 | 25

(D) Presets

Save up to two preset speeds to quickly switch between 

speed preferences. For example, you may prefer a slower 

speed when using rulers and a faster speed when doing all-

over meandering. 

Use the “+” and “–” buttons to adjust the speed percentage 

and then press the 

Record button next to one of the preset 

values to store that speed as a preset. To use one of the 

preset speeds, simply press the speed.

(E) Basting Mode In Manual Operation

Th

e HQ Capri has a basting mode that causes a stitch to be 

formed at a specified time interval – every 0.5 second, 0.75 

second, 1.0 second, 1.5 second, or 2.0 seconds. Touch the 

basting icon to activate basting mode. Then press the “+” 

or “–” button to set the time interval for the basting stitch. 

Press the foot pedal to begin quilting. The HQ Capri will 

take a stitch (needle down and then needle up) at the 

specified interval. Coordinate how quickly you move the 

quilt sandwich with how quickly the machine takes a 

basting stitch. Experiment with the various speed options 

along with moving the quilt to find which of the settings 

work best for you to position the basting stitches on 

 

your quilt.

D

E

(F) Easy-Set Tension

The tension box on the Main Screen shows the current 

tension setting as a numeric value. As the tension dial is 

turned clockwise to tighten the top tension, the number 

increases in increments of five. As the tension dial is turned 

counter-clockwise to loosen the top tension, the number 

decreases in increments of five. The faster the dial is 

turned, the faster the numbers increase or decrease.

After setting the bobbin tension, test the top tension 

by stitching on a fabric scrap on the edge of the quilt 

batting and backing. Increase or decrease as needed until 

balanced tension is achieved. Make a note of the thread 

type (weight, brand, color) and the tension value to quickly 

andeasily set the tension when this same thread is used 

again in the future.

 

F

Содержание HQ Capri 18























































Отзывы: