Handicare Raptor Скачать руководство пользователя страница 81 | Manualshive

Страница: 81 / 163

Handicare Raptor Скачать руководство пользователя страница 81

E

GIS

SK75326/6

PG

DRIVES

TECHNOLOGY

50

4

Wiring

You are responsible for establishing the suitability of the particular wiring arrangement
used on the scooter. PG Drives Technology can make general recommendations for
wiring to Tiller Modules, but PG Drives Technology accepts no responsibility for the wiring
arrangement used.

4.1

Wire Gauge

The minimum recommended wire size is 0.22mm

2

for all connections.

4.2

Connectors

4.2.1 Surface Mount Variant

The Tiller Module is fitted with a Molex ‘Mini-fit jr’ 4 way connector.
See www.molex.com for your local distributor.
Part Numbers are as follows:

Molex ‘Mini-Fit-Jr.’ 4 socket receptacle:

39-01-2040

PG Drives Technology TruCharge Display Cable.

PGDT Part number:

SA76199

Only use the PG Drives Technology TruCharge Display Cable
number SA76199 supplied with kit D50133.

Hand tools for crimping and extraction are available from Molex. The references are
as below.

Molex ‘Mini-Fit-Jr.’ Crimp tool:

69008-0724

Molex ‘Mini-Fit-Jr.’ Extraction tool:

11-03-0044

Only use the exact tools specified.

4.2.2 Inset Variant

The Tiller Module is fitted with a 3 way AMP CT series connector, part number 175487-
3. The mating crimps and connector housing have Amp part numbers 179227-1
and 179228-3 respectively. Only these parts should be used.
There is also a solder/ring tag point for an Electro-Static Discharge (ESD) drain path
wire.

«
...
79
80
81
82
83
...
»

Содержание Raptor




































































































































































Отзывы:

Нет отзывов