manualshive.com logo in svg

Handicare Raptor, Руководство по обслуживанию, Страница: 80 / 163

Поделиться
Скачать
Handicare Raptor Скачать руководство пользователя страница 80

PG 

DRIVES

 

TECHNOLOGY

49

E

GIS

 - T

ILLER

 M

ODULE

SK75326/6

EGIS TILLER MODULE MOUTNING - INSET

Scooter

Tiller

Double Sided
Adhesive Pad

Label

Tiller

Module

Alternatively M3 (4-40 UNC) hardware can be used. The height of the display from the
printed circuit board is 8.0mm (0.31"). Suitable spacers should be used so that the
display is fixed slightly below the scooter’s control panel. Ensure that the metallic fixing
hardware (nuts, washers etc.) do not touch the conductive tracks on the printed circuit
board.

3.2.2 Sealing

The module should be sealed against the ingress of water and dust by a placing an
adhesive waterproof overlay over the display cut-out. The overlay should contain a
suitably sized transparent window and the overall dimensions should be at least
36.0mm x 20.5mm (1.41" x 0.81")

The sealing label is only supplied with the Tiller Module kit
number D50066.

Содержание Raptor




































































































































































Отзывы:

Нет отзывов