Handicare Raptor, Руководство по обслуживанию, Страница: 78 / 163

PG
DRIVES TECHNOLOGY
47
E
GIS
- T
ILLER
M
ODULE
SK75326/6
3 Mounting
3.1 Handling
The Tiller Module contains electronic components which may be sensitive to static
electricity. Always store the modules in the original packaging until they are ready to
be used. When the modules are removed from the packaging, ensure correct anti-
static precautions are taken.
3.2 Surface Mount Variant
3.2.1 Fixing
The scooter’s Tiller should be fitted with holes as suggested in the diagram below.
3.2.2 Sealing
The supplied single-sided adhesive gasket should be used to create a seal between
the Tiller Module and the scooter’s control panel. See the following illustration
When correctly fitted this arrangement will give the Tiller Module an IPX5 dust and
water rating.
EGIS TILLER MODULE FIXING HOLES - SURFACE
1.75" 44.5mm
0.94" 24.1mm
Hole = 0.12" 3.1mm
1.5" 38 .0mm