Handicare Raptor, Руководство по обслуживанию, Страница: 74 / 163

PG
DRIVES TECHNOLOGY
43
E
GIS
- T
ILLER
M
ODULE
SK75326/6
1 Introduction
Study Chapters 1 & 2, they describe the intended functionality of the Tiller Module
and the details for connection to the Egis Controller.
The Egis Status Indicator parameter will require adjustment
before the TruCharge indicator will work correctly. Refer to
the Sp1b Pragramming and Diagnostic Technical Manual.
There are two variants of the Tiller Module. These are:
•
Surface mount variant.
• Inset variant.
1.1 Surface Mount Variant
The Surface Mount variant attaches to the tiller module from the outside ( See the
following illustration). The electronics compartment of the Tiller Module has an IPX5
dust and water rating.
• Surface mount variants - D50133
D50133 consists of:1 TruCharge Display Module, 1 TruCharge Display
Cable, and 1 Gasket
EGIS TILLER MODULE - SURFACE
1.2 Inset Variant
The Inset variant must be embedded within the Scooter Tiller’s housing( See the following
illustration). The electronics of the controller will then take on the dust and water rating
of the Scooter Tiller.