Handicare Raptor, Руководство по обслуживанию, Страница: 109 / 163

SP1A
SK73762/6
PG
DRIVES TECHNOLOGY
4
1 Not Controllers manufactured before Sept 2002
The following table summarizes the full compatibility between the SP1a versions and
the Solo, Egis, and S-Drive controllers.
2 The SP1a Programmer
The SP1a is a handheld programmer for use with PG Drives Technology Solo, Egis and
S-Drive controllers. Primarily intended for general purpose use, it can set all of the key
controller speed, acceleration and braking characteristics, and allows different settings
to be tried out while the programmer is still plugged into the controller.
The programmer is a menu-driven device which plugs directly into the controller and
has a context-sensitive help function available to guide users through the menus. The
SP1a can also display error messages from the controller which allows any problems
with the vehicle electrical system to be identified and corrected quickly.
The SP1a takes advantage of the programmability of the controller, offering functions
not available with less sophisticated controller designs.
Function Controller Compatibility
Solo Egis S-Drive D50040 D49371
SP1a Version
Forward Acceleration All
Forward Deceleration All
Reverse Acceleration All
Reverse Deceleration All
Max Fwd Speed All
Min Fwd Speed
Max Rev Speed
Min Rev Speed
Invert Throttle
Sleep Timer
Read System Log
Read Timer
3 Onwards
All
3 Onwards
All
All
3 Onwards
3 Onwards
All
All
All
All
All
7 Onwards
All
7 Onwards
All
All
7 Onwards
7 Onwards
(1)