Handicare Raptor, Руководство по обслуживанию, Страница: 66 / 163

PG
DRIVES TECHNOLOGY
35
E
GIS
- I
NSTALLATION
SK75326/6
8 Mounting
8.1 Orientation
The controller should be mounted so that water cannot enter and remain in the
connector recesses. The recommended mounting orientation is such that the
connectors must be lowermost. The function of the controller is not sensitive to mounting
orientation. The electronics compartment of the controller has an IPX5 dust and water
rating. Optional rubber sealing boots are available for tiller and charger/programming
connector, please contact PGDT for details.
EGIS DIMENTION DIAGRAM
155.5mm 6.1"
(HOLE CTS)
139.5mm 5.4"
2 x Fixing Holes 5.5mm
114mm 4.5"
8.2 Position
The controller must be mounted in a position where it is not exposed to levels of water,
dust, shock or vibration above those expected on a mobility scooter application. The
controller has been tested in accordance with IS07176/14 with respect to these
conditions.
The controller has excellent thermal performance but, to improve this further, the base-
plate may be secured against a metal part of the scooter chassis. To provide even
better thermal performance, a non-silicone thermally conductive paste or pad may
be applied between the base-plate and the scooter chassis.
Contact PGDT if you need further advice.