Handicare Raptor, Руководство по обслуживанию, Страница: 54 / 163

PG
DRIVES TECHNOLOGY
23
E
GIS
- I
NSTALLATION
SK75326/6
3 Connections
3.1 General
Study the data sheet for the control system to identify:
• The output current, ratings and restrictions
• The connector pin assignments
Recommendations for the cross-sectional area, ratings and materials for wiring are
given in the table in section 3.5. These depend on the application. You are responsible
for establishing the suitability of the particular wiring arrangement used on the scooter.
PGDT can make general recommendations for wiring to Egis Controller, but PGDT
accepts no responsibility for the wiring arrangement used.
Make sure that the connectors you use are reliable under all operating conditions
and correctly wired with no short circuits. Do not use unsuitable components - it may
result in poor scooter reliability.
The scooter manufacturer is responsible for establishing the
suitability of the particular wiring arrangements used on
the scooter, for both normal use and stalled conditions. PGDT
can make general recommendations for wiring for Egis
Scooter Controller, but PGDT accepts no responsibility for,
and accepts no liability for losses of any kind arising from,
the actual wiring arrangement used.
The scooter manufacturer is responsible for ensuring that
only the mating connectors specified by PGDT on the control
system’s specific data sheet are used to connect to the
controller. PGDT accepts no liability for losses of any kind
arising from failure to comply with this condition.
The scooter manufacturer is responsible for ensuring that
suitable connectors are used and securely mated throughout
the scooter wiring system and that the workmanship
associated with the wiring system is of a good enough quality.
Failure to meet this condition could result in intermittent
operation, sudden stopping or veering, or even create a burn
or fire hazard. PGDT accepts no liability for losses of any
kind arising from failure to comply with this condition
The power connectors for the Egis controller are specially designed by PGDT for mobility
applications. The crimps are standard AMP Timer parts but the plastic housings are
custom. Kits of connectors can be purchased from PGDT or directly from the
manufacturers, Intech.