Handicare Raptor Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 163

Handicare Raptor Скачать руководство пользователя страница 47

E

GIS

SK75326/6

PG

DRIVES

TECHNOLOGY

16

12

Programming

If you cannot find a position of the speed limiting control that suits you, the controller
can be programmed to meet your needs. The controller can be programmed in two
ways – with an SP1 Programmer or with a Pocket Programmer.
The SP1 is a small hand-held unit which can be plugged into your controller to alter
the program.
A Pocket Programmer is an interface module and a piece of software for Palmtop
type computers. The module connects into the controller and then communicates
with the Palmtop PC so that the controller can be programmed using a Windows type
environment
The programming tools may be included with your scooter. If they are not, your scooter
distributor or service agent or scooter manufacturer will be able to program your
controller for you.
If you have a programmer, read the user guide before you use it.
If you re-program your controller, make sure that you observe any restrictions given in
your scooter user manual. Note any changes you make for future reference.

Programming should only be conducted by healthcare
professionals with in-depth knowledge of PGDT electronic
controllers. Incorrect programming could result in an unsafe
set-up of a scooter for a user. PGDT accept no liability for
losses of any kind if the programming of the controller is
altered from factory pre-set values.

13

Controller Servicing

All repairs and servicing must be carried out by authorized service personnel. Opening
or making any unauthorized adjustments or modifications to the controller or its
components will invalidate any warranty and may result in hazards to yourself or other
people, and is strictly forbidden.

PGDT accept no liability for losses of any kind arising from
unauthorized opening, adjustment or modifications to the
Egis controller.

If the Egis controller is damaged in any way, or if internal
damage may have occurred through impact or dropping,
have the product checked by qualified personnel before
operating.

PGDT accepts no liability for losses of any kind

arising from failure to comply with this condition.

«
...
45
46
47
48
49
...
»

Содержание Raptor




































































































































































Отзывы:

Нет отзывов