manualshive.com logo in svg

Handicare Raptor, Руководство по обслуживанию, Страница: 46 / 163

Поделиться
Скачать
Handicare Raptor Скачать руководство пользователя страница 46

PG 

DRIVES

 

TECHNOLOGY

15

E

GIS

 - O

PERATION

SK75326/6

11

Battery Charging

To charge the scooter batteries connect the charger plug into the battery charger
socket on the scooter. You will not be able to drive the scooter when the charger is
connected.

Do not exceed the maximum charging current for the scooter.
PGDT accepts no responsibility for losses of any kind from
failure to comply with this condition.

Ensure that the charger plug pins are of the correct polarity
to be compatible with the scooter’s charging socket. Failure
to observe this condition could result in a burn hazard or a
fire hazard. PGDT accepts no responsibility for losses of
any kind from failure to comply with this condition.

Do not disconnect the batteries or open-circuit the circuit
breaker while charging is in progress. Failure to observe
this condition could result in a burn hazard or a fire hazard.
PGDT accepts no responsibility for losses of any kind from
failure to comply with this condition.

Only use the battery charger that has been supplied with
your scooter. The use of incorrect chargers could damage
the batteries, scooter, controller or charger itself, or may
result in parts overheating creating the potential for burns
or even fire. PGDT accepts no responsibility for losses of
any kind from failure to comply with this condition.

Содержание Raptor




































































































































































Отзывы:

Нет отзывов