Handicare Raptor, Руководство по обслуживанию, Страница: 142 / 163

PG
DRIVES TECHNOLOGY
37
SP1A - E
GIS
D
IAGNOSTICS
SK73762/6
The previous voltage measurements should be carried out
with the vehicle’s drive wheels raised above the ground. Read
the vehicle manufacturer’s instructions regarding the jacking
up of the vehicle.
3.10 Trip Type 10 - High Battery Voltage
This occurs when the controller detects that the battery voltage has risen above 38V
for a 24V controller or above 42V for a 36V controller. The most common reasons for
this are overcharging of the battery or bad connections between the controller and
the batteries. Check the batteries and the connections to them.
If the trip is still present after the batteries and connections have been checked, then
the controller may be defective. Refer to section 5.
3.11 Blink - System Asleep
To use the scooter once it has been immobilised by the Sleep Timer function, turn the
scooter off and on again.