HandHeld Image Kiosk 8560, Руководство пользователя

Страница: 44 / 72

5 - 12 Rev (a)
6/27/06
Image Kiosk 8560 User’s Guide-
Preliminary CP4 Draft
Port Menu
The Port menu enables you to configure the port. On the main screen, tapping once on a port opens a popup menu.
Menu Item Description
Enable
Disable These commands enable or disable 802.1X authentication on the port. The port should be enabled
before the protocol is started.
Enabling a port is not the same as starting it (see Start/Stop on page 5-10) ; however, both actions are
required for the Client to work.
Configure Opens the port configuration screen; see Configuring Client Authentication on page 5-13.
Delete Removes an adapter from the port list. Selecting Delete has not effect on the
Setup Screens
Use the following navigation aid to examine the configuration options for each set of screens:
Configuring Client Authentication (see page 5-13)
• User Tab (see page 5-13)
• System Tab (see page 5-15)
• Server Tab (see page 5-16)
Configuring a Port (see page 5-17)
• Wireless Networks Tab (see page 5-17)
• Protocol Tab (see page 5-18)
Configuring a Network (see page 5-19)
• Profile Info Tab (see page 5-19)
• WEP Mgmt Tab (see page 5-20)
• WPA Settings Tab (see page 5-21)
Saving Your Settings
!
Network setup information for the client is stored in the registry. To make sure that network information persists through
hard resets (i.e., power cycles), back up the registry AFTER you complete network setup. You can also export the registry
to save it for future use on multiple devices.
To back up the registry, tap Start > Power Tools > RegBackup .
To export the registry, tap Start > Power Tools > RegEdit > File > Export.