HandHeld Image Kiosk 8560, Руководство пользователя

Страница: 37 / 72

Image Kiosk 8560 User’s Guide- Pre-
liminary CP4 Draft Rev (a)
6/27/06
5 - 5
Wireless Properties Window
Open the Wireless Properties window by double-tapping an available network on the Wireless Information Tab (page 5-3).
The SSID appears in the field automatically. Other fields on the window are usually completed based on information from the
available network. Certain fields may auto-fill or auto-select based on the criteria you enter in other fields.
Field Description
Network Name (SSID) This is the name of the network. SSID (Service Set IDentifier) is the name assigned to a
wireless Wi-Fi network. All devices must use this same, case-sensitive name to communicate,
which is a text string up to 32 characters long.
When you double-tap on a network name of one of the found networks on the Wireless
Information tab, its SSID appears here automatically. Don’t change the name.
This is an ad hoc
network This option identifies the wireless LAN as an ad hoc network, which is a peer-to-peer wireless
network that transmits from device to device without using a central base station (access
point). Routing from one node to another on such a network requires an on-demand routing
protocol, which generates routing information only when a station initiates a transmission.
Encryption Select the encryption method from the following options:
•
Disabled—Select this option to disable encryption for Open or Shared authentications. This
information is often read from the selected network.
• TKIP (available only for WPA and WPA-PSK Authentications)
• WEP
Authentication Select the authentication method from the following options:
•
Open
• Shared
• WPA
• WPA-PSK
Network key & Key index If required for your LAN or encryption method, enter the network key and key index. These
fields may be disabled based on the selected network.
The key is provided
automatically Select this option if the key is provided automatically. This option may auto-select based on
network criteria entered previously.
Enable 802.1X
authentication Select this option to enable the specified authentication method for the 802.11b radio. This
option may auto-select based on network criteria entered previously.
EAP type Select the EAP type from the following options:
•
TLS
• MD5
• PEAP
Properties This button provides access to certificate settings. This button may be disabled based on the
selected network.