HandHeld Dolphin 7850 Series, Руководство пользователя

Страница: 85 / 132

Dolphin® 7850 Series User’s Guide–
Preliminary Rev (b)
5/15/2007
8 - 9
Logging
The event log is an ASCII text file named “LOG8021X.TXT” located in the directory defined by the WINDIR environment variable
(usually the Windows directory).
In the text file, the format of the entries is:
Time Stamp Message Text
Note: To see an event log on the window, tap View > Event Log (see page 8-4).
If you wish to start with a blank file or clear the event log, close the Client (so that the icon no longer appears in the command
bar) and delete the log file (log8021x) in WIndows Explorer. When you restart the Client, a new log file is created.
Server Tab
The Server tab controls how the Client authenticates the server that handles the 802.1X protocol on the network side. This
applies only to the TLS, TTLS, and PEAP authentication methods and is used to tell the Client what server credentials to accept
from the authentication server to verify the server. The Client uses this information to verify that the Client is communicating with
a trusted server.
Field Description
Do not validate server
certificate chain If this option is selected, the server certificate received during the TLS/TTLS/PEAP message
exchange is not validated.
* Certificate issuer
must be
This is the certificate authority used during TLS/TTLS/PEAP message exchange. Any Trusted
CA is the default selection and means that any certificate authority can be used during
authentication.
Both trusted intermediate certificate authorities and root authorities whose certificates exist in
the system store are available for selection in the drop-down list.
* Allow intermediate
certificates
This option is selected by default and enables unspecified certificates to be in the server
certificate chain between the server certificate and the certificate authority selected in the
Certificate issuer must be
field.
When selected, this option allows the server certificate received during negotiation to be issued
directly by the certificate authority or by one of its intermediate certificate authorities.
If disabled, then the selected Certificate issuer must have directly issued the server certificate.
Server name must be This is either the server name or the domain the server belongs to, depending on which option
is selected below the text field.
During authentication, this name will be compared to the server certificate’s Subject: CN field.
Must match exactly The server name entered must match the server name found on the certificate exactly.
Must contain domain
name The server name field identifies a domain and the certificate must have a server name
belonging to this domain or to one of its sub-domains (e.g., zeelans.com, where the server is
blueberry.zeelans.com).