AI-002 operation manual
Issue 1 21.09.09 display version 13 . main controller version 69 . servo version 61
P.51 of 59
Appendix D . Tape Start, Tape Middle, Tape End Parameters
> Tape Middle Program
> Tape Middle Program > micro reverse
This setting controls the distance that the roller rotates backward during an intermediate stop
while taping. A larger setting increases the angle that the upper roller rotates backward while a
smaller settings decrease this angle. Touch the ON/OFF button to enable/disable this function. If
this function is „off‟, the roller does not rotate backward during a stop.
