Hand Held Products Quick Check PC600 страница 33 Скачать руководство пользователя

Страница: 33 / 72

Notes

You can add notes to any symbol report. Notes apply to all individual scans.

Notes

View, User Notes

Reflectometer

The Quick Check

PC can serve as a reflectometer and return static reflectance

readings.

Reflectometer

View, Reflectometer

Select “Reflectometer” and place the wand over the area from which the reading
is required. A reflectance display screen will be displayed.

Save the current symbol summary (including all individual scans), for future
reference. (You do not have to save the file to produce a report.)

Save File

File, Save

F12

If you do not want the file saved in the default directory, select a drive and
directory for the file, enter the file name, and select “Save.” An “.

hhp

” extension

will automatically be added to the file name to denote it as a Quick Check

file.

You may print either a symbol grade summary or a detailed report of an
individual scan. Parameters are user-selectable.

If you want to print a report of a previously saved symbol summary, open the file,
otherwise, go to “Select Report” or “Print” as necessary.

Open File

File, Open

[Ctrl]+O

Содержание Quick Check PC600









































































Результаты поиска

Содержание Quick Check PC600

Отзывы:

Похожие инструкции для Quick Check PC600

Бренды по названию

Популярные бренды

Hand Held Products Quick Check PC600, Руководство пользователя

Результаты поиска

Содержание Quick Check PC600

Отзывы:

Похожие инструкции для Quick Check PC600

Бренды по названию

Популярные бренды