manualshive.com logo in svg

Hand Held Products IMAGETEAM 5620, Системное руководство, Страница: 166 / 180

Поделиться
Скачать
Hand Held Products IMAGETEAM 5620 Скачать руководство пользователя страница 166

13 - 2

IMAGETEAM™ 2020/5620 System Manual

Online Product Service and Repair Assistance

You can also access product service and repair assistance online at 

www.handheld.com

.

Technical Assistance

If you need assistance installing or troubleshooting your scanner, please call 
your Distributor or the nearest Hand Held Products technical support office:

North America/Canada:

Telephone:

(800) 782-4263, option 4 (8 a.m. to 6 p.m.  EST)

Fax number:

(315) 685-4960

E-mail:

[email protected]

Europe, Middle East, and Africa:

Telephone-
European Ofc:Int+31 (0) 40 29 01 600
U.K. Ofc:Int+44 1925 240055
E-mail:[email protected]

Asia Pacific:

Telephone:Int+852-3188-3485 

or  2511-3050 

E-mail:[email protected]

America Latina:

Teléfono: (704) 998-3998, opción 8 
E-mail:[email protected]

Online Technical Assistance

You can also access technical assistance online at 

www.handheld.com

.

Limited Warranty

Hand Held Products, Inc. ("Hand Held Products") warrants its products to be free 
from defects in materials and workmanship and to conform to Hand Held 
Products published specifications applicable to the products purchased at the 
time of shipment.  This warranty does not cover any Hand Held Products product 
which is (i) improperly installed or used; (ii) damaged by accident or negligence, 
including failure to follow the proper maintenance, service, and cleaning 
schedule; or (iii) damaged as a result of (A) modification or alteration by the 
purchaser or other party, (B) excessive voltage or current supplied to or drawn 
from the interface connections, (C) static electricity or electro-static discharge, 
(D) operation under conditions beyond the specified operating parameters, or (E) 
repair or service of the product by anyone other than Hand Held Products or its 
authorized representatives.

Содержание IMAGETEAM 5620





















































































































































































Отзывы:

Нет отзывов