Hamworthy VARMAX 120, Инструкция по установке, наладке и обслуживанию

Страница: 20 / 156

20 / 156
00BNO9168-I (U0606551)
VARMAX -
Installation, Use and Maintenance
figure 4 - Peripheral clearance
4.3. Installing the boiler
VARMAX boilers must not be installed on an inflammable surface (wooden
floor, plastic floor covering, etc.).
Recommended distances from walls and the floor:
Ensure there is sufficient clearance so that work may be carried out easily
on the boilers.
The minimum values (in mm) are indicated in figure 4 and in the table below.
A B C D H
MODELS
120 450 500 150
140 450 500 150
180 450 500 320
225 450 500 320
275 450 600 500 263
320 450 600 500 263
390 450 700 500 427
450 450 700 500 427
525 450 700 500 427
600 450 700 500 427
The hashed zone above the boiler must remain free of obstacles to
allow for inspections and cleaning of the burner.
WARNING:
A 2 cm free space must also be left above the side panels to allow for
their disassembly and reassembly.
These values cannot be replaced by specific regulatory requirements.
A
B
C
D
00BET9005-#
Models 120 to 450 : Top view :
A
B
C
D
Front
Back
Models 525 and 600 :
H
C
A
B
D
H
C
figure 5 - Specific clearances required for
burner maintenance operations
U0038671-C