EN
24
TROUBLESHOOTING
Possible cause
Solution
Voltage switch (AC - 0 - DC) in
the wrong position.
Check that the right cord is in use and that the switch is the right
position – AC for mains power, DC for battery power from 12 V
socket in vehicle.
The air pressure in the tyre or
object to be inflated is higher
than the set pressure.
Set to a higher pressure.
The fuse in the 12 V plug has
tripped.
Replace the fuse.
The plug is not plugged in.
Plug in the plug.
Fuse in mains distribution
board/vehicle tripped.
Replace the fuse. If the product trips the fuse again stop using
the product immediately and take it to an authorised service
centre to be checked and repaired.
Safety switch tripped.
Reset safety switch. If the product trips the safety switch again
stop using the product immediately and take it to an authorised
service centre to be checked and repaired.
The power cord is damaged.
Have the cord replaced by qualified service personnel.
Содержание 008377
Страница 3: ...3 4 1 1 2 3 4 5 6 7 8 9 10 11 2 1 2 3 4 5 6...
Страница 4: ...5 7 6...
