Model
HI200
Cordwood BTU’s
55,000 BTU’s
Emissions (grams/hr)
EPA Certi
fi
ed
3.0 grams/hr
Flue Size
6” (152mm)
Max. Log Size
18”
Height
19-5/8” (499mm)
Width
23” (584mm)
Depth:
(w/ standard
fl
ue adaptor)
15-1/16" (383mm)
(w/ offset
fl
ue adaptor)
17-11/16" (449mm)
HI200 Wood Insert
Hampton HI200 Small Cast Iron Wood Insert
Dimension Description
HI200
A
Adjacent Side Wall (to side)
15” (381mm)
B
Mantle (to top)**
20” (508mm)
C
Top Facing (to top)
14” (356mm)
D
Side Facing (to side)
7-3/8” (187mm)
E
Minimum Hearth Extension*
16” (406mm) US
18” (457mm)Can
F
Minumim Heath Thickness*
1-1/2” (38mm)
G
Minimum Hearth Side Extension
6” (152mm) US
8” (203mm)Can
Clearance Requirements
Side and Top facing is a maximum of 1.5" thick.
Floor protection must non-combustible, insulative material with an R value of 1.1
or greater.
*
If the hearth extension is
fl
ush with the
fl
oor (F) it must extend 19.5" in front
of the body face (E).
Note: Hearth Extension Width (G) is measured from edge of fuel door to
side of hearth.
** A non-combustible mantel may be installed at a lower height if the framing
is made of metal studs covered with a non-combustible board.
Minimum Fireplace Opening:
WARNING
Failure to maintain required clearances is a major cause of chimney related
fi
res.
Installation of this
fi
replace must comply with these clearances
Please note:
Due to ongoing product development, product appearance and speci
fi
cations
are subject to change without notice.
This manual is intended to be a Sales Reference Guide only.
Do NOT use for actual framing and installation of any unit.
Some speci
fi
cations may change without notice.
You must use the actual manual for exact installation speci
fi
cations.
