7 HamptonBay.com
Please contact
1-855-HD-HAMPTON
for further assistance.
Operation
OPERATION MODES
Set the amount of time you want the lights to stay on after motion is detected: 2 or 6 minutes. After the selected
amount of time, the light will be automatically turned off.
Mode
Sensitivity
Switch Position
Timer Switch
Position
Explanation
Stand-by
Mode
L - Less
M - Medium
H - High
Test, 2, or 6
This is the state when the power is turned on. If you have
turned off the power for a long period of time and upon
restoring power to the fixture, the light will turn on in 2
seconds and remain on for approximately 60 seconds
regardless of motion. Then it enters the Auto Detection Mode
or Test Mode based on the setting of the Timer switch.
Auto
Detection
Mode
L - Less
M - Medium
H - High
2 or 6
This is the normal motion detection mode. The motion
detector turns the light on automatically after sensing
movement in its coverage area at dusk and stays on as long
as motion is detected. When motion stops, the light remains
on for the predetermined time you set (2 or 6 minutes) and
then turns off automatically.
Test Mode
L - Less
M - Medium
H - High
Test
This mode allows you to adjust the sensitivity of the motion
detector to a desired level at dusk or dawn. When motion
stops, the light will turn off in about 5 seconds.
Manual
Override
Mode with
Auto Reset
L - Less
M - Medium
H - High
2 or 6
This mode allows you to turn on and off your fixture by
using the existing wall switch, regardless of the presence
of motion. The manual override mode works only when it is
dark (light intensity level is below 30 Lux). The unit resets
itself back to Auto Detection Mode after 8 hours. To activate
the feature, turn the existing wall switch off then back on
within 3 seconds so the light stays on continuously. The unit
will turn off and reset itself to Auto Detection Mode after 8
hours.
Dusk-to-
Dawn Mode
L - Less
M - Medium
H - High
D to D
In this mode, the light turns on at dusk and off at dawn
automatically, regardless of the presence of motion. The “D to
D” setting ensures lights are non-operational in daylight and
only function at night. To activate, set the Timer switch to the
“D to D” position.
Motion Sensor Unit
LED
AC Power Supply
Mounting Side
Photocell
Lense
Motion Detector
Indicator Light
Test
Time Switch
PIR Motion
Sensitivity
Switch
2 6
L M H
D to D
