5
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly
1
Attaching the right /left leg
Attach the right leg (C) and left leg (D) to the seat (A) using bolts (AA), washers (HH/EE), and nuts(DD). Use the wrench (
II
) to hold the
nuts (DD) in place while you tighten with the Key (JJ).
NOTE:
To avoid destroying the finish, do not put the parts on the ground directly.
DD
1
EE
4
2
Attaching the chair back and the hinges to the seat
Attach the bottom brace of the chair back (B) to the hinges (G) using bolts (BB), washers(HH/FF). Tighten the bolts (BB) with the
Allen key (JJ).
Attach the hinges (G) to each side of the seat (A) using bolts (AA), washer (HH/EE),and nuts (DD) as shown. Use the
wrench (II) to hold the nuts (DD) in place while you tighten with the key (JJ).
NOTE:
To avoid destroying the finish, do not put the parts on the ground directly.
AA
5
CC
1
A
B
DD
A
EE
F
F
F
C
AA
CC
H
I
E
A
A
C
