background image

Hampton Bay Lifetime Limited Warranty

The retailer warrants the fan motor to be free from defects in workmanship and material 
present at time of shipment from the factory for a lifetime after the date of purchase by the 
original purchaser.  The retailer also warrants that all other fan parts, excluding any glass or 
plexiglass blades, to be free from defects in workmanship and material at the time of 
shipment from the factory for a period of one year after the date of purchase by the original 
purchaser.  We agree to correct such defects without charge or at our option replace with a 
comparable or superior model if the product is returned to the retailer.  To obtain warranty 
service, you must present a copy of the receipt as proof of purchase.  All costs of removing 
and reinstalling the product are your responsibility.  Damage to any part such as by accident 
or misuse or improper installation or by affixing any accessories, is not covered by this 
warranty.  Because of varying climatic conditions in the United States this warranty does not 
cover any changes in brass finish, including rusting, pitting, corroding, tarnishing or peeling.  
Brass finishes of this type give their longest useful life when protected from varying weather 
conditions.  A certain amount of wobble is normal and should not be considered a defect.  
Servicing performed by unauthorized persons shall render the warranty invalid.  

There is no

 

other express warranty.  The retailer hereby disclaims any and all warranties, 
including but not limited to.  Those of merchantability and fitness for a particular 
purpose to the extent

 

permitted by law. 

 The duration of any implied warranty which 

cannot be disclaimed is limited to the time period as specified in the express warranty.  Some 
states do not allow limitation on how long an implied warranty lasts, so the above limitation 
may not apply to you.  

The retailer shall not be liable for incidental, consequential, or 

special damages arising out of or in connection with product use or performance

 

except 

as may otherwise be accorded by law.

  Some states do not allow the exclusion of incidental 

or consequential damages, so the above exclusion or limitation may not apply to you.  This 
warranty gives specific legal rights, and you may also have other rights which vary from 
state to state.  This warranty supersedes all prior warranties.

Lifetime Limited Warranty

Date Purchased  

Store Purchased

Model No.

Serial No.
 
Vendor No.

UPC

581-645

219032

792145351115

Содержание 792145351115
















Отзывы: