Hampshire Controls Corporation
20 Mar. 2021
MPS Operating Manual
Page 16
Email Notification Configuration
To configure the Email feature you must
access the configuration web pages on the
MPS. To do this, you will first need to
connect a computer with a 10/100/1000
base-T network adapter to the MPS using a
standard Ethernet patch cable.
Configure the computer’s Ethernet adapter
with a static IP of 192.168.0.140 and subnet
mask of 255.255.255.0.
To display the main informational web page,
open
a
web
browser
and
type
http://192.168.0.141 into the address bar.
You will be presented with a web page much
like the example shown on the right.
Before clicking any of the links on the main
page, you should first access the setup page.
Type http://192.168.0.141/setup.html into
the address bar of your web browser. An
example of the setup page is shown on the
following page.
You will be prompted for a username and
password. The username is “setupadmin”
and the password is configured by the
NetworkCode
parameter (the default is
-22718
).
