Hammond XK-5, Руководство пользователя, Страница: 79 / 170

79
Paramet
ers
Frequency
Loudness
LF
Limit
HF
Limit
Min. Level
Expression = Maximum
120Hz 4kHz
Output
Frequency
Loudness
LF
Limit
HF
Limit
Min. Level
120Hz 4kHz
Expression = Minimum
Output
Degree
Value
127
0
1
2
3
PEDAL TO LOWER:
Triggers the Pedal to Lower note of Pedal part.
BASS 1C - BASS 3C
Triggers the speci fi ed note of Pedal part. BASS 1C - 3C.
P. CHORD CLOSE, OPEN
Triggers the Prochord function, closed or opened voicing.
❷ FOOT CONTROLLER 2 - MODE (G)
Th is sets the foot controller function which connected to the CTRL2 jack.
❸
FOOT SWITCH ON EXP. PEDAL - MODE (G)
Th is sets the foot switch function which equipped on the EXP-100F, XPK-3, PK-
25PXK or XPK-250.
‹
EXPRESSION
❹
EXPRESSION - SOURCE (G)
Sets the source of Expression control.
EXP. PEDAL:
For using Expression pedal.
MIDI: For using Expression information received at the UPPER keyboard channel.
BOTH:
Both sources above are received. The last value of each is enabled.
❺ EXPRESSION - MONITOR
Displays the current value of expression. In case of no sound or no change when the
expression pedal is pressed, this monitor shows whether the expression value changes or
not, so you may discover the cause of trouble (if any). Th is can also be an indicator when
playing from low volume to fade in.
❻ EXPRESSION - MINIMUM LEVEL (G)
Sets the volume at minimum expression.
Th e setting range is OFF, -40dB to 0dB. At OFF the instrument is silent when Pedal is
at Minimum (all the way back). Th e other value points represent the lowest volume that
will be present at the Pedal’s minimum position.
❼ EXPRESSION - LIMIT LOW FREQUENCY (G)
❽ EXPRESSION - LIMIT HIGH FREQUENCY (G)
Sets the amount of Low or High Frequency to remain, when the expression is set at
minimum.
Th e setting range is OFF, -40dB to 0dB. At OFF the sound totally disappears, but at
other value points the set volume is kept, even if the expression is at minimum.
❾ EXPRESSION - GAIN (S)
Sets the gain (range) of the connected expression pedal.
Depending on the type of the connected expression pedals, the expression value may not
change. In such case, adjust this parameter to obtain the desired response.
❿
EXPRESSION - CURVE (S)
Adjusts change of expression value corresponding to the angle of the depressed expres-
sion pedal.
Th e setting range is 1 to 3. Refer each curve to the bottom right illustration or try playing
live to discern which curve is correct for you.
NOTE: The parameters indicated (S) are system parameters. They are recorded when set, and are
common in each Patch.
‹
GLIDE
⓫
GLIDE - RANGE (P)
Sets the bend range of pitch by semi-tone. Setting range is -24 to +12.
⓬ GLIDE - TIME (P)
Sets the time from the start of glide to reach the pitch set at (11). Th e setting range is
0.1 to 5.0 seconds.
⓭ GLIDE - AMP (P)
Engages a “fade” along with the Glide, where the volume drops in tandem with the pitch
EXPRESSION LIMIT
One of the human ear’s characteristics is that
when the volume falls, the sound of high or
low frequency becomes di
ffi cult to hear.
On this model, it is recti fi ed. The volume is
maintained above a certain level even when
the volume goes down in order to keep the
sound of high or low frequency audible.
The similar function is adopted on most home
audio equipment. It is called the “loudness”
function.
It sounds
CLOSE OPEN
Played as
Lower Upper
PROCHORD
“PROCHORD” function which adds complex
harmonic voicing to single notes played on
the UPPER manual based on chord structures
played on the LOWER manual.
NOTE: The parameter with (P) indicated is
a Patch parameter, and is recorded
to each Patch. (G) indicates “global
parameter”, which is recorded upon
being set, and is common with each
Patch.