manualshive.com logo in svg

Hammond XK-3, Руководство пользователя

Поделиться
Скачать
Hammond XK-3 Скачать руководство пользователя страница 37

Setting Up

37

PERCUSSION

The attack feeling of the percussion is a Hammond exclusive.
Percussion is usually used with the Drawbar sound.

[SECOND] BUTTON

The second harmonic, or 4' Drawbar decay, is added to the UPPER Part.
To use this, press the [SECOND] button , and the LED will light.

[THIRD] BUTTON

The third harmonic, or 2 2/3' Drawbar decay, is added to the UPPER Part. By mixing it
with the Drawbars, power and solidness is obtained.
To use this, press the [SECOND] button , and the LED will light.

[FAST] BUTTON

This cuts short the decay time of Percussion.
It is effective if you use this to play with a clear-cut rhythm in an up-tempo  piece.
When the LED is OFF, it is SLOW.  It gets “FAST” when you press the [FAST] button ,
and the LED will light.

[SOFT] BUTTON

This reduces the volume of Percussion.
When the LED is OFF, it is NORMAL. If you press the [SOFT] button, the percussion
level is soft, and the LED will light.

NOTE:

You can fine-adjust Percussion.  (P. 67)

DECAY

The piano sound gradually goes out even
if you keep the key down. This is called
“decay”. The violin, on the contrary,
keeps sounding at a certain volume. This
is called “sustain”.

NOTES

"Percussion does not sound!"

The factory default setting:  Percussion does not produce sound except at the Preset
Key [B], if the Combination Preset is Bank B. (See left.) This setting is the same as on
the B-3/C-3.

NOTE:

You can set any Preset Key to sound Percussion. (P. 67)

DRAWBAR CANCEL

When either the [SECOND] or the [THIRD] button is ON, 1' in the Upper Part Draw-
bars does not produce sound.  This is the same action as on the B-3/C-3.

NOTE:

You can set to play 1' Drawbar, while Percussion is ON. (P. 67)

Содержание XK-3



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды