8. Check for leaks.
9. Discard used fluid properly.
DRIVE CHAIN LUBRICATION
Lubricate the drive chain with chain spray lube or an approved chain lube at the
general lubrication interval specified in the Periodic Maintenance Chart section.
Lubricate more often under severe use, such as in dirty or wet conditions.
NOTICE
Washing the drive chain with a high pressure washer or gasoline can cause
premature wear and drive chain failure. Don't use a high pressure washer or
gasoline to clean the drive chain.
Adjusting or operating the vehicle with improper rear drive chain slack can
result in severe damage to the transmission and drive components. Always
make sure the slack is within the stated specifications.
DRIVE CHAIN SLACK ADJUSTMENT
1. Loosen upper nut
q
.
2. Turn lower nut
w
clockwise in 1/2
turn increments, then turn upper nut
until tight. Follow this procedure until
chain is at proper tension. Chain
should have 1/4” to 1/2” deflection.
3. Repeat the above steps until chain
is adjusted to desired fit.
54