Hammer K3 e-classic, Руководство пользователя

Страница: 16 / 80

16
Panel Saw
K3 basic/K3 winner/K3 e-classic
Circular saw drive / Spindle moulder unit Alternating-current motor Three-phase current motor
Motor voltage 1x 230 V 3x 230 V / 3x 400 V
motor frequency 50/60 Hz 50/60 Hz
System of protection IP 55 IP 55
K3 Winner/Winner comfort
Motor power S6-40 %*) - 3 kW
Motor power S6-40 % - Option*) 3 kW 4 kW
K3 e-classic
Motor power S6-40 %*) - 3 kW (3 x400 V)
Motor power S6-40 % - Option*) 3 kW -
Antriebsmotor Vorritzeinheit (Option)
Motor power S6-40 %*) 0,65 kW**) 0,65 kW
*) S6 = operation under load and intermittent service; 40% = relative operating factor
**) Max. cutting height: 2 mm
Specifications
4.3 Electrical connection
4.4 Drive motor
The actual values can be found on the data plate.
4.2 Operation and storage conditions
Operating/room temperature +10° to +40°C
Storage temperature –10° to +50 °C
mains voltage according to specification plate ±10%
Safeguarding see circuit plan
Power supply cord (H07RN-F) 3x2,5 mm²/ 5x2,5 mm²
Triggering characteristic C (D*)
*) if starting up is slow, caused by large swinging masses