39
K2 M - Part 2/2
Maintenance
3.
Push the
[Emergency stop]
.
Machine stops immediately.
1.
Continue with next step.
Machine does not stop immediately.
1.
If present: Switch off
[Main switch]
(position
"O" / "OFF"
).
2.
Disconnect the machine from the mains power supply.
3.
Contact Felder-Group service centre.
4.
Switch the machine on using the green
[start]
button with the
[emergency
stop]
button locked.
Machine does not start.
1.
Unlock the
[Emergency stop]
button by turning it.
2.
Repeat with all
[Emergency Stop]
buttons on the machine.
Machine can be started.
1.
Press the red
[Stop]
button.
2.
If present: Turn the
[main switch]
off (position
"O" / OFF
)
and secure it.
3.
Contact Felder-Group service centre.
Check the red
[stop]
button and the emergency stop on machines not equipped with an
[emergency stop]
button
Carry out emergency stop test with all red
[Stop]
buttons on the machine.
1.
Prepare the machine to operate.
2.
Switch machine on.
3.
Press the red
[Stop]
button.
Machine stops immediately.
1.
Repeat the test on the next red
[Stop]
button.
2.
Repeat with all red
[Stop]
buttons on the machine.
Machine does not stop immediately.
1.
If present: Switch off
[Main switch]
(position
"O" / "OFF"
).
2.
Disconnect the machine from the mains power supply.
3.
Contact Felder-Group service centre.
Check the time it takes for the machine to come to a stop
Configuration of the machine without a motor brake:
The machine is not equipped with a motor brake. The design of the machine
guarantees that the saw arbour comes to a standstill within the legally applicable
standstill time of 10 seconds.
1.
Prepare the machine to operate.
2.
Switch the machine on and briefly let it run.
Содержание K2 M
Страница 55: ......
