Hammer Body Screen TX, Руководство пользователя, Страница: 10 / 11

DISPLAY Using Your Body Screen TX
App Installation
Bluetooth Not connected Connected Not connected
Measuring
Measuring
Connected
Connected
Not measuring
Not measuring
Not connected
Not connected
Body Composition
Hand Electrodes
Foot Electrodes
Body Test Progress
LED EFFECT OFF ON Flash
Connect to the smart scale via Bluetooth
Scan QR Code
Download < BodyPedia App >
Bind the scale to BodyPedia App
Bluetooth connection
Open BodyPedia App and Bluetooth of the phone, follow the instruction of the App to register,
bind the scale to the App and fnish the frst measurement.
Step on the scale with one foot to activate the scale, and take your foot off the scale when the
scale screen lights up. Open BodyPedia App, and the scale will connect to the App automatically
if the scale has been bound to the App.
1. Pull the tab underneath the scale. Wait for the screen display 0.0kg/lb before weighing.
2. Step on the footplate barefoot, and weight measurement begins.
Stand Barefoot to Begin.
3. Stand up straight for 3s, and weighing is completed when the figure stop flashing.
Figure stops flashing
4. Press and pull out the handles after weighing is completed.
Put the scale on a leveled, non-vibrating surface.
Search ”BodyPedia” in the Android Application Market, the lOS App Store or scan the following
QR code to download and install the App
App downloaded via other channels may be unusable. Before paring with your equipment, make
sure your equipment meets the following requirements:
iPhone 5S and above with iOS 10.0 and above system;
Android 5.0 and above with Bluetooth 4.0
Bluetooth
Body Composition
Foot Electrodes
Body Test Progress
Hand Electrodes
13 14