38
!
"
Saw-Spindle Moulder
B3 / B3 e-classic
8 Making adjustments and preparations Saw unit
Making adjustments and preparations
8.1 Safety instructions
Warning! Danger – electric current: Work on electrical fittings may only be carried out by qualified personnel
and in strict observance of the safety instructions.
Warning! Risk of injury: Improper adjustment and working setup can lead to serious bodily injury or material
damage. For this reason this work may only be carried out by authorised, trained personnel who are familiar
with the operation of the machine and in strict observance of all safety instructions.
• Before beginning any maintenance work on the ma-
chine, switch it off and secure it against accidentally
being switched on again.
• Before commencing any work with the machine, in-
spect it to ensure that it is complete and in technically
good condition.
• Ensure that there is sufficient space to work around
the machine.
• Keep the work area orderly and clean. Components
and tools that are not put in their correct place or put
away may be the cause of accidents!
• Install the safety equipment according to the instruc-
tions and check that it functions properly.
8.2 Sliding table catch
Fig. 8-1: Sliding table locking system
The sliding table can be locked into the centre position.
1.
Rotate the thumb screw by 90° and push in.
2.
Move the sliding table slowly into the locked positi-
on, until it engages.
3.
To unlock, pull out the thumb screw and rotate 90°
anti-clockwise.
!
Thumb screw
"
Sliding table
