manualshive.com logo in svg

Hammer A3-26, Руководство пользователя

Поделиться
Скачать
Hammer A3-26 Скачать руководство пользователя страница 38

38

$

 

%

 

!

#

"

&

 

Planer-Thicknesser

A3-26 / A3-31 / A3-41

8.8 Retooling from a thicknesser to a planer

1.

  Before beginning any maintenance work on the  

machine, switch it off and secure it against acciden-

tally being switched on again.

2.

  Loosen the clamping lever.

3.

  Using the system handwheel, position the thicknessing 

table at least 200 mm below the cutterblock.

4.

  Clamp the clamping lever.

! 

System handwheel

" 

Scale

# 

Clamping lever

Fig. 8-10: Thicknesser table

Fig. 8-11: Tilt the vacuum hood downwards

5.

  Remove the vacuum hose from the vacuum hood

6.

  Tilt the vacuum hood downwards

7.

  Release fall lock/tilt the planer table to you.

$ 

Vacuum hood

% 

Safety catch

Note:

Safety break switches are breaking the electric circuit. 

The planer arbor can only run when the joiner tables are closed or the extractor hood is tilted up.

8.

  Press the clamping lever inwards and lock in place.

7.

  Attach the vacuum hood by means of the connector to 

a suitable vacuum system. 

See Chapter >7.3 Chip extraction<

& 

Clamping lever

Fig. 8-12: Planer tables

Making adjustments and preparations

Содержание A3-26









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды