Hammer A2-26, Руководство по эксплуатации

Страница: 50 / 94

50
Adjustments and tool changes
8.1.5 Adjusting the planer fence
The machine is equipped with a fence to guide the workpiece. The planer fence
can be used across the full planing width of the machine and tilted from 90° to
45°.
2
3
1
4
Fig. 34: Adjusting the planer fence
1 Clamping horizontal adjustment
2 Clamping angle adjustment
3 Scale angle adjustment
4 Read angle adjustment
Tilt planer fence 90° - 45°
1. Switch off the machine.
2. Open angle adjustment clamp.
3. Set the required angle (tilt the fence plate using both hands).
4. Read the angle from the scale.
5. Lock the clamp.
Slide the planer fence forwards or backwards:
1. Switch off the machine.
2. Open the clamp for the horizontal adjustment.
3. Move the planer fence to the desired position.
4. Lock the clamp.