Hamilton Jet HJ212, Инструкция по установке и обслуживанию

Страница: 74 / 198

Maintenance
Installation and Service Manual
Steering System
Daily

Check integrity.
Monthly

A thorough check of the whole steering system. Refer to section: Checking the steering system on page
8-15
Steering cotter pins
Daily:

Check the condition of the cotter pins.

Check that the nuts are tight.
Steering crank and steering crank ball
Check every 3 months:

Thoroughly check for excessive wear of the steering crank ball. The maximum clearance between the
crank ball and the nozzle bush is 1.2mm (0.047ins).

Check for security of attachment and grease with water repellent grease.
Steering shaft and bushes
Grease every 100 hours (or 3 monthly whichever comes first):

Lightly grease with a water repellent grease.

Check play in steering shaft and bushes there should be no binding.
Steering shaft o-ring
Check every 3 months:

Check the steering shaft o-ring looking for signs of leaking and or excessive lateral play in the shaft.
Replace the o-ring if necessary.
Steering and reverse cables
Daily:

Check the steering and reverse cables for signs of kinking or damage to the end connectors.

Check the cable tension.

Check cable attachment points.
It is important the cable attachment points are secure or loose of steering or reverse
control could occur.
Monthly or 30 operational hours:

Thoroughly check the cables for freedom of movement.

Disconnect and grease the cables if necessary.
8-12