Hamilton Beach Commercial SmartServe BIC2000, Руководство по эксплуатации

Страница: 5 / 28

5
Installation
(cont.)
Your SmartServe™ will need to be customized
to adjust for different cup sizes and to control
several different blending, mixing, and water
rinse parameters. If your model has already
been customized for your cups and menu,
please skip this step. For a copy of your custom
cycle, contact Technical Services. Follow these
instructions to download this program via USB
Port on SmartServe™ Control Panel.
NOTE: Your flash drive containing the
customized programs may be included in the
packaging or will be sent separately, depending
on your model. To change your program or
create a new one, contact your salesperson.
1. Insert flash drive containing only the
customized program into the USB Port.
2. Turn Power Switch to the ON (I) position.
3. Follow instructions on display, to allow file to
download completely.
4. Turn Power Switch to the OFF ( ) position.
5. Remove flash drive.
6. Turn Power Switch to the ON (I) position and
follow the on-screen instructions.
If your SmartServe™ needs to be reprogrammed
to adjust for your menu and cup sizes, contact
your sales representative for assistance.
Electrical Shock Hazard.
• Plug into a grounded 3-prong outlet.
• Do not remove ground prong.
• Do not use an adapter.
• Do not use an extension cord.
• Failure to follow these instructions can result in
death, fire, or electric shock.
Observe all governing codes and ordinances.
A 120-volt, 60-Hz, AC-only, 15-amp, fused
electrical supply is required. (A time-delay fuse
is recommended.) It is recommended that a
separate circuit serving only this equipment be
provided.
Downloading a Custom Cycle
Electrical Requirements
w
WARNING