HZ20
Adaptor BNC to 4mm binding posts
HZ22
50
Ω
BNC Feed-through termination 1GHz, 1W
HZ23
Attenuator 2:1, BNC male to BNC female, for oscilloscope service only.
HZ24
Set of 4 BNC 50
Ω
attenuators; 3/6/10/20dB; 1GHz, 1W, incl. 1x HZ22
Test Cables
HZ32
Test cable BNC to single stacking banana plugs; 40 inch
HZ33
Coaxial cable BNC/BNC, 50
Ω
, 20 inch
HZ33S
Coaxial cable BNC/BNC, 50
Ω
, 20 inch, insulated
HZ33W
Coaxial cable BNC/BNC, 50
Ω,
20 inch, elbow
HZ34
Coaxial cable BNC/BNC, 50
Ω
, 40 inch
HZ34S
Coaxial cable BNC/BNC, 50
Ω
, 40 inch, insulated
HZ72S
IEEE-488-Bus-Cable, 40 inch. double shielded
HZ72L
IEEE-488-Bus-Cable, 60 inch, double shielded
HZ84-2
Spare Printer Cable for HD148 (CE) and HM305 / 1007 (CE)
HZ84-3
Spare Printer Cable for combination of 25pole D-SUB / 26pole plastic male
Wide Band Probes with RF alignment
Type
Attenuation
Bandwidth
Risetime
Input Impedance
Max.
Ratio
Input Voltage
HZ36
1:1/10:1
10/100MHz
<35/3.5ns
1/10M
Ω
II57/12pF (10:1) 600V (DC+peak AC)
HZ51
10:1
150MHz
<2.4ns
10M
Ω
II12pF
600V (DC+peak AC)
HZ52
10:1
250MHz
<1.4ns
10M
Ω
II10pF
600V (DC+peak AC)
HZ53
100:1
100MHz
<3.5ns
100M
Ω
II4.5pF
1200V (DC+peak AC)
HZ54
1:1/10:1
10/150MHz
<35/2.4ns
1/10M
Ω
II57/12pF (10:1) 600V (DC+peak AC)
Special Probes
HZ38
Demodulator Probe
0.1 - 500MHz
max. 200V (DC)
HZ58
High Voltage Probe, 1000:1; R
i
approx. 500M
Ω
; DC - 1MHz
max. 15kV (DC+peak AC)
HZ47
Viewing Hood for Oscilloscopes HM205, 408, 604-1+2, 1005 and 1007
HZ48
Viewing Hood for Oscilloscopes 303, 304, 305, 604-3 and 1004
during transpor-
tation of an oscil-
loscope. It is made
of a durable vinyl-
coated material
that is designed to
withstand the
stress and wear
and tear of field
use.
Specifications:
Current range:
20A
DC
/ 30A
AC
Accuracy:
± 1% ± 2mA
Dielectric strength:
3.7kV, 50Hz, 1min.
Output sensitivity:
100mV/A
Frequency range:
DC-100kHz
Resolution:
±1mA
Load impedance:
>100k
Ω
Divers:
BNC-cable, 2m.
HZ 33
HZ 32
HZ 34S
HZ 72/S/L
HZ 33W
HZ53
HZ54
HZ20
HZ22
HZ23
HZ24
HZ58
Accessories
supplied
HZ39 Spare Cable for HZ36
HZ57 Spare Cable for HZ51, HZ54
Spare-parts for modular probes only
Spare-part Kit HZ40
HZ96 Carrying Case
for oscilloscopes
HM203, 205, 208,
408, 604, 1005
and
1007
HZ97 Carrying Case
for
HM303, 304,
305, 604-3, 1004
and
HM5005 / 6 / 10.
The carrying case provides protection
HZ39
HZ57
HZ84-2
HZ36
HZ38
HZ51
HZ52
HZ40
HZ 56 AC/DC Current Probe
Utilising Hall Effect technology to provide a broad frequency response, the
probe will accurately measure AC, DC and complex waveforms. The compact
clip-on design conforms to the IEC1010 safety standard and allows non-
intrusive measurement of current from 5mA to 30A peak to an accuracy of
±1%. The probe gives a voltage output directly proportional to the measured
current which is compatible with a wide range of measuring instruments.
Subject to change without notice
05/96
OSCILLOSCOPES
