www.hameco.eu
HA-80 user manual
hameco
4
Installation and Connection of Equipment
1. As shown in the diagram, firstly connect the external antenna, connect the compute
device via USB data wire, insert the pug of host power adapter into the power input port
of host and then insert the AC power supply into the socket; turn on the power button of
host and host power indicator will turn red.
2. Before use, the wireless microphone slave should be connected with the USB power
adapter to fully charge the built-in battery. The slave charging indicator will be on in
orange when charging and will be off when the battery is fully charged. When the host is
connected wirelessly, the slave ring light flashes in red, indicating low battery and that
the battery needs to be charged in
time.
3. Long press the slave power button until the circular green indicator is on, which means
thewireless microphone slave is connected with the host successfully through wireless
mode; if this indicator flickers in green, it has no wireless connection with the host.
4. The installation distance between host loudspeaker and wireless microphone slave
must be over 2m; the recommended installation distance between wireless microphone
slaves is 1.5 m.