5
The L-732 Dual Scan Precision Roll Alignment Laser
Primarily designed for roll alignment and other similar
alignment applications that do not require the exacting
tolerances of the L-742 Ultra-Precision Laser, the L-732
Precision Dual Scan Laser also offers two automatically
rotating laser planes that can be configured at the factory
to have either two vertical planes, or one horizontal and
one vertical laser plane. The L-732 laser planes are flat
and square to 2 arc seconds (.00012 in/ft or 0.01 mm/m).
It comes with a pitch, roll and yaw adjustment base for
setting the laser planes parallel to reference points, 2-
arc-second level vials and a powerful magnet for
maximum stability.
Applications:
(for alignments with tolerances of .00015 in/ft or (0.01 mm/m) or greater
•
Normal or blown-film lines (roll alignment)
•
Rubber (roll alignment)
•
Leveling almost any surface (squares, frames, ways,
flanges, circles, etc.
•
Laser cutting machines
•
Water-jet cutting machines
•
Checking plumb of a vertical surface up to 100 ft.
(30.5 m)
•
Steel (roll alignment)
•
Saw Mills
•
Checking way twist and parallelism between
vertical surfaces
•
Textiles (roll alignment)
Measuring and aligning:
•
The flatness of almost any vertical surface (squares,
frames, ways, flanges, circles, etc.)
•
The straightness of horizontally and vertically
traversing axes
•
The parallelism of vertical or horizontal surfaces, even
if those surfaces are 100 ft. (30.5 m) apart
•
The squareness of any two vertical surfaces
•
The flatness and straightness of vertical surfaces
•
Measuring surfaces up to 200 ft. (61 m) long with one
setup
Содержание Dual Scan L-732
