4
The L-742 Dual Scan Ultra-Precision Roll Alignment Laser
With two continuously sweeping, ultra-flat, orthogonal
laser planes, the L-742 is ideally suited to roll alignment
applications. The laser can be configured at the factory
to have either two vertical planes, or one horizontal and
one vertical plane, allowing a user to not only measure,
but also fix alignment problems in a fraction of the time
needed with conventional methods.
Using the L-742 you can quickly and easily check and
correct horizontal roll parallelism of even the tallest
process mills, pick up and check offset centerline
benchmarks, and perform similar alignments with
increased accuracy and shorter setup times.
Applications:
(for alignments with tolerances of .00002 in/ft or 0.0017 mm/m or higher)
•
Roll parallelism in paper mills, printing presses and
film lines
•
Leveling almost any surface (squares, frames, ways,
flanges, circles, etc.
•
Roll forming machines
•
High-precision, laser and water-jet cutting machines
•
Checking plumb of a vertical surface up to 100 ft.
(30.5 m)
•
Measuring surfaces up to 200 ft. (61 m) long with one
setup
•
Checking way twist and parallelism between
surfaces
•
Circuit board drilling machines
Measuring and aligning:
•
The flatness and straightness of almost any surface
(squares, frames, ways, flanges, circles, etc.)
•
The flatness and straightness of horizontally and
vertically traversing axes
•
The parallelism of vertical or horizontal surfaces, even
if those surfaces are 100 ft. (30.5 m) apart
•
The squareness of any two surfaces
•
The flatness and straightness of vertical surfaces
Содержание Dual Scan L-732
