HAMAR LASER Dual Scan L-732, Руководство по эксплуатации

Страница: 5 / 37

1
The L-743 Ultra-Precision Triple Scan
®
Laser
The L-743 Ultra-Precision Triple Scan ® Laser is
Hamar Laser’s most versatile and powerful
machine tool alignment laser. It has been designed
specifically for 3-5-axis machining centers to
measure and correct machine geometry. In most
cases, all it takes is one setup to measure flatness,
straightness, parallelism and squareness of the main
axes of most typical machining centers.
Since the system provides live measurements, any
errors that are found can be fixed with the same
setup. The laser mounts on a machine or stable base
so that the laser plane can project the measurement
reference out to 100 ft. (30.5 m) in radius for each
laser plane.
Applications: (for alignments with tolerances of 0.00002 in/ft or 0.0017 mm/m or greater)
•
Machining centers (HBMs, VBMs, HMCs, VMCs,
VTLs, gantries and surface grinders)
•
Automotive transfer-line wing bases
•
Injection molding machines and presses
•
Aircraft assembly (seat track alignment, setting water, butt and station planes, wing-to-body and body-
to-body join alignment, etc.)
Roll parallelism in:
•
High-precision, laser and water-jet cutting machines
•
Paper mills
•
Film lines
•
Circuit board drilling machines
•
Printing presses
•
Blown-film lines
Measuring and aligning:
•
The flatness of almost any surface (squares, frames,
ways, flanges, circles, etc.)
•
The squareness of up to 3 surfaces
•
Measuring surfaces up to 200 ft. (61 m) long with
one setup
•
The parallelism of horizontal and vertical surfaces
even if those surfaces are 100 ft. (30.5 m) apart
•
Checking way twist and parallelism between
horizontal surfaces
•
The straightness of horizontal and vertical
surfaces
•
The straightness and flatness of
horizontally and vertically traversing axes
•
Checking plumb of a vertical surface up to
100 ft. (30.5 m)
•
Checking way twist and parallelism
between vertical surfaces
Warning!
Always operate the L-730 and L-740 series lasers described below in an upright position.
Do NOT invert!