HAMAR LASER Dual Scan L-732, Руководство по эксплуатации

Страница: 12 / 37

8
Using the Control Panel
Figure 2 shows the control panel for the L-743 and
L-733 lasers, including the locations of:
•
The battery pack/AC adapter connection
•
The power switches and POWER ON
indicator for the laser
•
The power switches for the individual
scanners
•
The light for the precision level vials
Note: As of January 1, 2014, the level light
switch has been modified. The level light now
stays on permanently to increase stability and
allow the laser to warm up faster.
•
The rotation speed control. This control slows
the scanner spin until you can see the laser
beam pass over the target (the farther away the
target is located, the slower the turret must
spin).
Figure 3 shows controls panel for the L-742 and L-732 lasers, both the “Wall-Wall” configuration with
two vertical laser planes, and the “Wall-Ceiling” configuration, with one vertical laser plane and one
horizontal laser plane.
Figure 3 – Laser Control Panels for the L-742 and L-732 Lasers. On the left is the “Wall-Wall” configuration, or two vertical laser planes. On
the right is the “Ceiling-Wall” configuration, or one vertical plane and one horizontal plane.
Figure 2 -- Laser Control Panel—L-743 and L-733 Lasers