ORCA-Lightning Digital CMOS Camera C14120-20P Instruction manual_Ver.2.5
5
3. INSTALLATION
Avoid using or storing this camera in the following places
•
Places where the temperature is not the operating temperature indicated in the specifications
•
Places where the temperature is not the storage temperature indicated in the specifications
•
Places where the temperature varies greatly
•
In direct sunlight or near a heater
•
Places where the humidity levels are not the operating humidity levels indicated in the
specifications and where the camera may be exposed to liquid
•
Places where the humidity levels are not the storage humidity levels indicated in the
specifications and where the camera may be exposed to liquid
•
Close to a strong source of magnetism or ratio waves
•
Places where there are vibrations
•
Places where the camera may come into contact with corrosive gases (such as chlorine or
fluorine)
•
Places where there is a lot of dust
Do not allow the ventilation ports to become blocked
To prevent the camera from overheating, do not wrap the camera in cloth or any other
material, or in any way allow the camera's ventilation ports to become blocked. If the
camera is being operated in a closed environment, ensure clearance of at least 10 cm
from both the intake (Fan) and the exhaust (Air outlet) vents when setting up the
camera.
Weight of the camera
Be careful not to drop the camera when carrying it as it is approx. 3.6 kg.
Accessories installation
When the mount adapter, the adjuster pole or the base plate is installed, always secure
a space where you can work stably and do it without risks.
The C14120-20P instruction manual and each installation manual should be followed.