C9300-201 Ver.1.2
10H
AMAMATSU PHOTONICS K.K.
7. CONNECTING
CABLES
Refer to the figure below when connecting the various cables.
AC adaptor
Camera
(
A3472-06: option)
○
3
Power supply cord
○
1
Camera cable (option)
CameraLink
interface board
○
2
CameraLink interface cable
Computer
NORMAL
LINE
COOLING
SERIAL I/F
DIGITAL OUT
TIMING I/O
POWER
Fig. 7-1
•
When cables are connected, confirming the power switch is in the OFF position.
①
Camera cable (Option)
This connects the camera to the AC adapter.
②
CameraLink interface cable (Option)
This connects the CameraLink interface connector to the CameraLink interface board
mounted on the host computer.
③
Power supply cord (Option: The accessories of A3472-06)
Note
•
Hamamatsu recommends optional interface for the camera.
- AC adaptor: A3472-06
- Camera cable: A3194-01
- CameraLink interface cable: A9262-05
Depending on type of interface cables, the camera may not keep
CE marking compliance in terms of EMC directive.