qCMOS Camera C15550-20UP / C15550-20UP01 Instruction manual_Ver.1.3
26
9-6 UPDATE PROCEDURE OF COAXPRESS INTERFACE BOARD
If you use an optional CoaXPress interface board, when the driver included in DCAM-API does not match
the firmware version of the interface board, the following message prompting update of the interface
board may be displayed.
When this message is displayed, you need to update the firmware of the interface board to use the
connected camera. In this case, an update procedure will be displayed on the screen when you click
"OK". Update the interface board according to it.
•
The displayed message may vary depending on the version of DCAM-API used.