Hamamatsu Photonics C15550-20UP Скачать руководство пользователя страница 23

Страница: 23 / 72

qCMOS Camera C15550-20UP / C15550-20UP01 Instruction manual_Ver.1.3

8-3 DISCONNECTION OF WATER COOLING HOSES

•

Remove the water cooling hoses only when it is necessary to remove.

•

Cooling water may be left inside the camera even after hoses are removed. In such

case, remove water inside by blowing air from connectors. Be careful not to splash

water onto the camera.

1. Turn off the camera power and all peripheral devices including circulating water cooler.

2. Remove the hose on circulating water cooler side.

Follow the instruction on the circulating water cooler when you disconnect the hose from the circulating

water cooler.

3. Remove water or water drop inside the hose and the camera by air.

- Blow air from one side of hose. Prepare water absorption sheet (such as Waste, Towel or so) and

catch pan on another side of hose in order to avoid water drop or water splash.

- Blow Air until no water drop come out.

4. Remove the camera from the microscope (if the camera is used on the microscope).

It is not necessary to remove the camera from the microscope if it is possible to remove the hoses from

the camera as it is.

5. Place the camera on the stable table.

Put the lens cap on to protect the sensor.

6. Change the WATER connector direction to be downward.

Prepare water absorption sheet (such as Waste, Towel or so) and catch pan.

7. Remove hoses one by one, and wipe water.

Disconnect hoses with pushing button while being careful not to splash water.

Figure 8-4

Button

Содержание C15550-20UP









































































Результаты поиска

Содержание C15550-20UP

Отзывы:

Похожие инструкции для C15550-20UP

Бренды по названию

Популярные бренды

Hamamatsu Photonics C15550-20UP, Инструкция по эксплуатации

Результаты поиска

Содержание C15550-20UP

Отзывы:

Похожие инструкции для C15550-20UP

Бренды по названию

Популярные бренды