qCMOS Camera C15550-20UP Instruction manual_Ver.1.0
20
8. WATER COOLING
•
Improper handling of the camera without observing these cautions could lead to
personal injury to the user or damage to property.
8-1 CAUTIONS
(1) Change the cooling method
The default setting of cooling method is Air-cooling. Cooling mode can be changed by software
which is called, “DCAM Configurator”. (refer to 9-5 “STARTUP DCAM CONFIGURATOR”).
(2) Cooling water
It is recommended to use soft water (except pure water) for cooling water.
If you plan on using water other than soft water as recommended for example antifreeze etc, refer
to description of cooling water which is written in 12. “MAINTENANCE” or contact a Hamamatsu
subsidiary or your local distributor.
(3) Recommendation temperature
Hamamatsu recommends 25 °C for Circulating water temperature.
For the appropriate temperature range of the cooling water, confirm with the instruction manual of
your circulating water cooler.
(4) Condensation
Use the camera under the environment where condensation will not take place referring to the
following graph.
0
10
20
30
40
50
60
70
80
0%
10%
20%
30%
40%
50%
60%
70%
80%
15
20
25
30
35
40
Am
bie
nt
h
um
id
ity
[%
]
Ambient temperature [
℃
]
Relations between ambient temperature and ambient humidity
Water temperature 20 ℃ for water cooling
Water temperature 25 ℃ for water cooling
Graph 8-1
